The MAX30102 can be used as an oximeter by measuring the oxygen concentration in the blood (SpO2 percentage) and also can be used as heart rate sensor (beats per minute). The device has two LEDs, one emitting red light, another emitting infrared light. For pulse rate, only the infrared light is needed. Both the red light and infrared light is used to measure oxygen levels in the blood. 

Features:

1. - The MAX30102 is an integrated pulse oximeter and heart rate monitor bio sensor module. It integrates a red LED and an infrared LED, photo detector, optical components, and low-noise electronic circuitry with ambient light suppression.
2. - The MAX30102 features a 1.8V power supply and a separate 5.0V power supply for internal LEDs for heart rate and blood oxygen acquisition in wearable devices, worn on the fingers, earlobe, and wrist. The standard I2C-compatible communication interface can transmit the collected values ??to the , KL25Z and other micro controllers for heart rate and blood oxygen calculation.
3. - In addition, the chip can also shut down the module through software, the standby current is close to zero, and the power supply is always maintained. Because of its excellent performance, the chip is widely used in the Samsung Galaxy S series mobile phones.
4. - Compared with the previous generation MAX30100, the chip integrates a glass cover to effectively eliminate external and internal light interference, and has the best reliable performance.

The Main Parameters:

1. LED peak wavelength: 660nm/880nm
2. LED power supply voltage: 3.3~5V
3. Detection signal type: light reflection signal (PPG)
4. Output signal interface : I2C interface
5. Communication interface voltage: 1.8~3.3V~5V (optional)
6. Board reserved assembly hole size: 0.5 x 8.5mm

Pin Description:

1. VIN: main power input terminal 1.8-5V
2. 3-bit pad: Select the pull-up level of the bus, depending on the pin master voltage, select 1.8v or 3_3v (this terminal contains 3.3V and above)
3. SCL: the clock connected to the I2C bus;
4. SDA: data connected to the I2C bus;
5. INT : Interrupt pin of the MAX30102 chip;
6. RD: RED LED ground terminal of MAX30102 chip, generally not connected;
7. IRD: The IR LED ground of the MAX30102 chip is generally not connected;
8. GND: Ground wire.

Package Included:

• 1pc x MAX30102 Heart Rate Sensor Module

Your order will be dispatched within 3-5 working days. Most deliveries require someone to accept and sign for the delivery to ensure the goods are received correctly. To help you we can arrange for delivery to be made elsewhere. Click here for more information.

We hope you like your purchase, however, if you are not entirely satisfied with any item, it can be sent back to us for a refund, provided it is returned within 14 days after delivery has been made (unless otherwise specified). Please click here for more information.